Built-In Mode Function

Built-In Mode Function

Touching the Switch-It logo on the capacitive touchscreen allows access to modes. This option can be enabled or disabled by pressing the green recessed button on the underside of the device.
External Mode Switch Jack

External Mode Switch Jack

The user may opt to disable the built-in mode option (Switch-It logo) and instead use an external switch. The TouchDrive2 provides a ⅛" monojack port on the side for an external mechanical mode switch. This feature allows for a cleaner setup with fewer wires plugging into an Omni or Enhanced Display.
Absolute and Relative Modes

Absolute and Relative Modes

The user may select absolute or relative mode for the neutral position. When in absolute mode, the middle of the TouchDrive2 active area is always center/neutral. When in relative mode, wherever the user touches again becomes the new center/neutral. This option can be enabled or disabled by pressing the green recessed button on the underside of the device.
Armrest and Midline Mount

Armrest and Midline Mount

In addition to simply being held or laying in the user's lap, the TouchDrive2 may be mounted at the armrest or midline position. The Active Controls Mounting System for TouchDrive2 is also available.

Support

Warranty coverage for this product may vary from one province to another depending on funding requirements.  Please contact your dealer for more details.