Find Your Dealer
Power Wheelchairs / Switch-It / Drive Controls / Switch-It TouchDrive 2

TouchDrive 2

Touchscreen proportional controller

The TouchDrive 2 uses proven cell phone touchscreen technology for ultra-sensitive and precise proportional driving capabilities for wheelchair control. Simply make contact with the glass surface of the device for activation; no force is required. Maintaining contact with the screen will allow for full driving capabilities including turning, veering, and spinning around. The TouchDrive 2 allows for mode access through either a built-in mode switch on the screen (Switch-It logo) or a ⅛" monojack port for external mechanical mode switches. The TouchDrive 2 can be configured for neutral to be the center of the active area (absolute) or movable (relative).

Find Your Local Dealer Options and Prices
Switch-It TouchDrive 2
Built-In Mode Function

Built-In Mode Function

Touching the Switch-It logo on the capacitive touchscreen allows access to modes. This option can be enabled or disabled by pressing the green recessed button on the underside of the device.
External Mode Switch Jack

External Mode Switch Jack

The user may opt to disable the built-in mode option (Switch-It logo) and instead use an external switch. The TouchDrive2 provides a ⅛" monojack port on the side for an external mechanical mode switch. This feature allows for a cleaner setup with fewer wires plugging into an Omni or Enhanced Display.
Absolute and Relative Modes

Absolute and Relative Modes

The user may select absolute or relative mode for the neutral position. When in absolute mode, the middle of the TouchDrive2 active area is always center/neutral. When in relative mode, wherever the user touches again becomes the new center/neutral. This option can be enabled or disabled by pressing the green recessed button on the underside of the device.
Armrest and Midline Mount

Armrest and Midline Mount

In addition to simply being held or laying in the user's lap, the TouchDrive2 may be mounted at the armrest or midline position. The Active Controls Mounting System for TouchDrive2 is also available.

Specifications

Dimensions
Dimensions:
  • Overall Size: 5.10" x 6.60"
  • Active Touchscreen Area: 3.78" x 5.12"
Product Information
Model Number:TD2
Performance/Weights
Alternative Control Type:Proportional
Activation Type:Capacitive Touchscreen
Feedback:Wheelchair Movement
Connector:DB9 Connector to Wheelchair Omni or Enhanced Display
Compatibility:
  • Penny and Giles R-Net (Omni Display from wheelchair manufacturer is required)
  • Quantum Q-Logic electronics (Enhanced Display from wheelchair manufacturer is required)
  • Not compatible with Invacare electronics
Mode Switch Inputs:
  • Built-In Mode Function (Switch-It logo)
  • Mechanical switches (i.e., Egg Switch, MicroLite, Piko) into Omni or Enhanced Display
  • Flex switch proximity sensor (SJX2 required)
Mounting Options:
  • Armrest Mount
  • Midline Mount
  • Active Controls Mount
  • Adaptive Mounting Available

As a part of our ongoing product improvement initiative, Sunrise Medical reserves the right to change specifications and design without notice. Further, not all features and options offered are compatible with all configurations of the wheelchair. Please consult the user instruction manual for more information.

Support

Warranty coverage for this product may vary from one province to another depending on funding requirements.  Please contact your dealer for more details.